Downloads

  1. Synergy™ HTX Multi-Mode Microplate Reader Specifications
    8/29/2014

    Synergy™ HTX Multi-Mode Microplate Reader is a compact, affordable system for 6- to 384-well microplates and Take3 Micro-Volume plates, automating absorbance, fluorescence, luminescence and AlphaScreen®/ AlphaLISA® measurements with superior performance in all detection modes using a unique dual-optics design.  

  2. Synergy™ HTX Multi-Mode Microplate Reader
    8/29/2014

    Synergy™ HTX Multi-Mode Microplate Reader is a compact, affordable system for 6- to 384-well microplates and Take3 Micro-Volume plates, automating absorbance, fluorescence, luminescence and AlphaScreen®/ AlphaLISA® measurements with superior performance in all detection modes using a unique dual-optics design.   The absorbance detection optics design uses a xenon flash lamp and monochromator for filter-free wavelength selection from 200 to 999 nm in 1 nm increments.  Fluorescence determinations are made using a tungsten halogen lamp with interference filters in conjunction with a PMT detector for maximum sensitivity.  Synergy HTX also features BioTek’s unique 4-Zone™ incubation to 50 ºC, dual reagent dispenser, plus linear and orbital shaking to meet a wide variety of assay requirements. Synergy HTX is controlled by the easy-to-use, yet powerful, Gen5 Data analysis software for data collection, analysis, exporting and reporting.   For increased workflow automation and throughput, BioTek’s BioStack can be easily connected to Synergy HTX to automatically process up to 50 microplates at a time. For convenience, versatility and affordability, Synergy HTX is the ideal multi-mode microplate reader.

  3. Future of the Cold Chain Industry Survey Results
    8/28/2014

    Previewing the results of Sonoco Thermosafe’s Future of the Cold Chain Industry survey, which will be fully released at the 12th Annual Cold Chain Global Forum in Boston, September 29-October 3.

  4. 2014 Guide to Global GDP Guidelines
    8/28/2014

    There is no single global GDP standard, this guide includes a map that highlights the latest national, regional and organizational guidelines, with links to the source documents. 

  5. In Silico and In Vitro Tools for the Rational Design of Novel Subunit Vaccines
    8/22/2014

    Dr. Noel Smith will describe Lonza’s Epibase™ in silico and in vitro tools for acceleration of the design and assessment of effective subunit vaccines.

  6. Innovations In Purification: Lowering Cost And Accelerating Drug Development With Pre-Packed Columns For Single Use
    8/22/2014

    Monoclonal antibodies (mAbs) are becoming key therapeutic agents for treating complex diseases, such as rheumatoid arthritis and cancer, as well as niche and rare disorders. By Carol Preisig, Ph.D.

  7. New Requirements In Global Clinical Supply Spur Evolution And Innovation
    8/19/2014

    Who knew clinical trial logistics had so much in common with the automotive and high-tech industries? That certainly seems to be the case with trends like just-in-time (JIT), customer-managed inventory (CMI) and vendor-managed inventory (VMI).

  8. Continuous Biomanufacturing: 10 Reasons Sponsors Hesitate
    8/15/2014

    By William Whitford, Sr. Manager, HyClone Cell Culture, GE Healthcare

    The industry is abuzz with talk about continuous biomanufacturing (CB), and it virtues have been well described. Here we will look at some of the barriers or concerns perceived to limit its value to the industry. Justified or not, quite a few concerns have been expressed regarding the implementation of this new, rather disruptive technology. 

  9. BIOSTAT® RM and Flexsafe RM Brochure
    8/13/2014

    The BIOSTAT® RM, a fully GMP compliant, single-use, wave-mixed bioreactor and Flexsafe bags are proven for a broad range of different cell lines incl. CHO, NS0, SF9, E.coli and mesenchymal stem cells.

  10. BIOSTAT® RM 20/50 Basic
    8/13/2014

    stand-alone unit for benchtop use.