Product/Service

RSS

Click Here To Download:
•Datasheet: Sartopore® 2 0.2 µm & 0.1 µm MidiCaps
•Datasheet: Sartopore® 2 0.1 µm MidiCaps And MaxiCaps
•Datasheet: Sartopore® 2 0.2 µm MidiCaps And MaxiCaps
•Datasheet: Sartopore® 2 0.45 µm MidiCaps And MaxiCaps

• Sartopore 2 filters feature a unique hydrophilic, heterogeneous double layer Polyethersulfone membrane with broad chemical compatibility, high thermal resistance and higher throughput and flow rate than other sterilizing grade filters

• The asymmetric pore structure of the Sartopore 2 filter provides high flow rates at low pressure drops, while the heterogeneous double layer Polyethersulfone membrane provides built-in prefiltration

• The Polyethersulfone membrane of the Sartopore 2 filter is compatible with a pH range of pH1 - pH14

• Sartopore 2 filters are easily wetted out for integrity testing, even after drying at 80 degrees C for 12 hours

• Sartopore 2 filters are available as standard cartridges, mini-cartridges, capsules and MaxiCaps for linear scale-up and broadest process flexibility

• Sartopore 2 capsules and MaxiCaps are delivered as individually packed sterile units, eliminating the need for on-site sterilization. All Sartopore 2 capsules and MaxiCaps are produced from the same materials of construction, allowing the end user consistent and predictable process scale-up

• Sartopore 2, sterilizing grade filters, are fully validated according to HIMA and ASTM F-838-83 guidelines

• Each Sartopore 2, sterilizing grade, filter element is tested for integrity by a Bubble Point and a Diffusion Test prior to being released, assuring the highest product quality and reliability

• Sartopore 2 filters are non- pyrogenic according to USP Bacterial Endotoxins and are non-fiber releasing according to 21 CFR

• Sartopore 2 filters fulfill all requirements of the current USP for "Sterile Water for Injection". This includes testing for Toxicity according to USP Plastic Class VI Test including Extractables

• A validation guide is available for compliance with regulatory requirements (Publication No SPK5732-e)

• An extractables guide is available for compliance with regulatory requirements (Publication No SPK5731-e)

  To see how this and other Sartorius Products fit into your bioprocess, click here.

Click Here To Download:
•Datasheet: Sartopore® 2 0.2 µm & 0.1 µm MidiCaps
•Datasheet: Sartopore® 2 0.1 µm MidiCaps And MaxiCaps
•Datasheet: Sartopore® 2 0.2 µm MidiCaps And MaxiCaps
•Datasheet: Sartopore® 2 0.45 µm MidiCaps And MaxiCaps